Geothermal Heating In Ct

Total Green's geothermal heating in CT system also features copper tubing which is a superior heat conductor, and is proven to be more reliable and efficient than plastic when used in water based systems. There is minimal excavation required. A ground tap is minimally invasive to the property. There is no giant excavation and no expensive deep well drilling. There is a lower total cost of ownership. The Total Green Geothermal Heating in CT System is more reliable than standard HVAC systems and has far lower maintenance. This system completely eliminates furnaces, A/C compressors and hot water heaters as well as venting. Geothermal heating in CT is much more comfortable and provides for substantially higher quality heating and cooling. Geothermal heating in CT also is at a lower temperature, higher humidity heat in winter and better dehumidification in summer. Geothermal heating in CT is also perfect for radiant heat and is totally compatible and integrates seamlessly. The Total Green System also offers a rapid payback.

The payback in new construction is under four years but can be even faster if you include the increased value of the structure. With geothermal heating in CT you can also increase your property value. The Building industry estimates that every energy dollar saved annually increases the value of the property by $20.00. So, you save $5,000 a year on heating, cooling and hot water, the home increases in value by $100,000. The heart of the Total Green System that makes their geothermal heating in CT superior is the extraordinary geothermal compressor assembly that happens to be manufactured right here in the US, and it is the Most Cost-Effective and Ultra Efficient Geothermal Heat Pump in the market. The system is matched to their unique ground taps, their efficiency ratings are exceptionally high, delivering at least 30% better performance than any other geothermal heating in CT pump system! In summation, the Total Green 'DX' Geothermal heating in CT is the most advanced technology for heating, cooling and Hot Water. It features the ultra efficient Direct Expansion (DX) Technology, which is at least 30% more efficient than other geothermal heating in CT systems, while at the same time achieving 4.5-5.0 COP heating and up to 33 SEER cooling in real world applications. You are probably wondering by now what sets Total Green Intl 'DX' Systems apart from the other geothermal heating companies in CT.

Total Green difference in geothermal heating in CT is that only one heat exchange transfer is required, where as compared to the two step transfer in water-based systems demanding about twice as much energy consumption, as well as a circulating pump and expensive deep well drilling. Water based systems use plastic tubing in which a water or glycol, anti-freeze or alcohol solution is circulated. The Total Green System for geothermal heating in CT distributes an environmentally friendly refrigerant through copper tubing. Copper tubing is a far superior heat conductor that has proven to be much more reliable over long term use and more efficient than plastic. This higher level of conductivity enables copper systems to work more efficiently with smaller-diameter tubes, so bore holes are smaller which in turn reduces excavation and installation costs.